fbpx

Installation of a Goddard Spiral Staircase

Jerry's Camera 087Our spiral stairs are already assembled at our factory to your personal specifications.  Having the staircase already welded together means that you simply bolt the top landing up to where it goes, set the staircase up to the landing and vice grip the landing to the landing bracket.  You will need to drill 4 holes into the landing then use the bolts supplied to bolt them together.  Then bolt the base plate and the tabs on the bottom balusters down to the floor.  If your stair is all steel you are done.  If you have oak treads and or handrail, it comes un-finished.  You will need to stain and finish the wood to your satisfaction and use the screws supplied to attach the wood parts to the stair.

All wood stairs take longer to install as they are dis-assembled for shipping and reassembled on the job site.  This will be covered in full in another blog.

If you have any questions please feel free to call us at 785-689-4341.

Thank you,

Jerry Goddard